Now with expanded parameters to fit even more spherical and toric patients.

  Biotrue ONEday 1-DAY ACUVUE MOIST DAILIES AquaComfort Plus
MOISTURE CONTENT 78% 58% 69%
OXYGEN LEVEL* 42 Dk/t 25 Dk/t 26 Dk/t
SPHERICAL ABERRATION CONTROL† ✔    
UVA/UVB PROTECTION‡ ✔ ✔  

‡WARNING: UV-absorbing contact lenses are NOT substitutes for protective UV-absorbing eyewear, such as UV-absorbing goggles or sunglasses, because they do not completely cover the eye and surrounding area. The effectiveness of wearing UV-absorbing contact lenses in preventing or reducing the incidence of ocular disorders associated with exposure to UV light has not been established at this time. You should continue to use UV-absorbing eyewear as directed. NOTE: Long-term exposure to UV radiation is one of the risk factors associated with cataracts. Exposure is based on a number of factors such as environmental conditions (altitude, geography, cloud cover) and personal factors (extent and nature of outdoor activities). UV-blocking contact lenses help provide protection against harmful UV radiation. However, clinical studies have not been done to demonstrate that wearing UV-blocking contact lenses reduces the risk of developing cataracts or other eye disorders.

*Oxygen levels for single vision spherical (SVS) lenses only.
†In SVS and toric lenses only.

Explore the Biotrue ONEday family of lenses:

Myopia/Hyperopia | Astigmatism | Presbyopia | Parameters
Myopia/Hyperopia

Back to top

The lens family with the most moisture among leading brands

Biotrue ONEday maintains ~100% of its moisture for a full 16 hours. 1

  • A) Lenses contain mostly PVP (polyvinylpyrrolidone) PVP is a hydrophilic, water-loving polymer.
  • B) Surfactant is added to maintain lens hydration Poloxamer 407 helps secure the high moisture level.
  • C) Surfactant drives to the lens surface naturally A patented dehydration barrier is the result.
  • D) Components create a lens that’s 78% water The same as the cornea.

 

EYE-OPENINGLY DIFFERENT

Prescribe Biotrue ONEday for more moisture

Astigmatism

Back to top

94% of patients experienced comfortable vision throughout the day.2

Reduced halos and glare with spherical aberration control.

Peri-Ballast Design

  • Spherical aberration control reduces halos and glare
  • Thin, tapered edge design limits lid interaction
  • Designed to work with natural blink patterns

 

EYE-OPENINGLY DIFFERENT

Prescribe Biotrue ONEday for a blink-inspired, peri-ballast lens

Presbyopia

Back to top

4 out of 5 patients fit successfully in one visit*

3-Zone Progressive Design for consistently clear vision all day.

3-Zone Progressive Design

  • Delivers clear binocular vision at all distances
  • Seamless transitions between 3 zones provide easy adaptation between key distances

 

EYE-OPENINGLY DIFFERENT

Prescribe Biotrue ONEday for successful fittings

*When the ECP followed the fitting guide for the 3-Zone Progressive Design of PureVision2 for Presbyopia lens. Thirty-nine ECPs (from 10 countries) refitted 441 existing soft contact lens wearing presbyopes into PureVision2 for Presbyopia lenses. Patients returned for follow-up visits after 1-2 weeks. ECP assessment of lens performance including ease of fit, and patient satisfaction with lenses in real-world conditions, were measured using a 6-point agreement survey.

Parameters

Back to top

Expanded Parameters

Material nesofilicon A
Lens material technology Surface Active Technology

Water content

78%

Oxygen transmission

42 Dk/t at -3.00D
Visibility tint Light Blue
Modality Daily disposable; Daily wear indication
UVA/UVB‡ Yes
Biotrue ONEday

Base Curve

8.6 mm

Diameter

14.2mm
Center thickness 0.1 mm @ -3.00D

Powers

PL to -6.50D (0.25D increments); -7.00D to -12.00D (0.50D increments); +0.25D to +6.00D (0.25D increments)

Aspheric optics

Yes
Biotrue ONEday for Presbyopia
Lens design technology 3-Zone Progressive Design, center-near aspheric optics

Base Curve

8.6 mm

Diameter

14.2mm
Center thickness 0.1 mm @ -3.00D

Spheric powers

+6.00D to -9.00D (in 0.25D increments, including plano)

Add powers

Low: +0.75D to +1.50D spectacle Add; High: +1.75D to +2.50D spectacle Add
Biotrue ONEday for Astigmatism

Lens design technology

Peri-ballast

Base curve

8.4 mm
Diameter 14.5 mm

Orientation mark

 Orientation mark at 6 o'clock Axis indicator varies with axis (160° example shown)
SPHERICAL POWERS SPHERICAL POWERS SPHERICAL POWERS
PL to -6.00D (0.25D increments) -6.50D to -9.00D (0.50D increments) +0.25D to +4.00D (0.25D increments)
CYLINDER POWERS CYLINDER POWERS CYLINDER POWERS
-0.75, -1.25, -1.75 -2.25-2.75 -0.75, -1.25, -1.75 -2.25 -0.75, -1.25, -1.75 -2.25
AXES AXES AXES
10° to 180° (in 10° increments) 10°, 20°, 70°, 80°, 90°, 100°, 110°, 160°, 170°, 180° 10°, 20°, 90°, 160°, 170°, 180° 10°, 20°, 60°, 70°, 80°, 90°, 100°, 110°,120°, 160°, 170°, 180° 10°, 20°,90°, 160°, 170°, 180° 10°, 20°, 70°, 80°, 90°,100°, 110°,160°, 170°, 180° 10°, 20°, 80°, 90°, 100°,160°, 170°, 180°

 

REFERENCES: 1. Data on file. Bausch & Lomb Incorporated. Rochester, NY. 2. Results of an online survey with patients who completed an evaluation program for Biotrue ONEday for Astigmatism contact lenses and wore their trial lenses for ≥4 days (n=1001). Survey results include patients who strongly agreed, agreed, or slightly agreed (on a 6-point agreement scale) with the surveyed statement, with a margin of error ±1.4%.


BOD.0234.USA.20